Collection: Clear Resin Epoxy Resin Kits

Every kit ships with pre-measured bottles of resin and hardener, matched to the correct ratio so you don't have to calculate anything. Printed instructions cover mix ratios, temperature targets, and cure times. 

Kit size depends on surface area and pour depth. As a working number, one gallon of clear resin covers roughly 12 square feet at ⅛ inch thickness. Small craft resin pieces like jewelry or a handful of coasters fit comfortably inside a starter kit. Medium work, think serving trays or a small side table, usually needs a half gallon to a gallon. Deep pour river tables and bar tops require multiple gallons. Calculate your volume, then add 10 to 15 percent for mixing waste and minor touch-ups. Better to have a little extra than fall short mid-pour.

Yes, our premium clear epoxy resin is designed for both, though the technique shifts depending on what you're making. For coating, the resin self-levels at around ⅛ inch and gives that wet, glossy top layer artists want over paintings or wood. For casting in silicone molds, you pour in layers no thicker than ¼ inch at a time so the resin doesn't overheat and trap bubbles. Same product, different approach. For anything genuinely deep, a dedicated deep pour formula is worth looking at, since it's engineered for thick single pours.

Clear resin takes color beautifully when you use the right additives. Mica powders, pigment pastes, and resin-specific colorants give vibrant, consistent results without compromising the cure. Acrylic paint works in small amounts, generally under 6 percent of total volume, but go heavier and you'll affect curing. Alcohol inks create gorgeous translucent effects, though they're flammable, so be careful around torches when removing bubbles. Water-based paints are safer than oil-based ones, which don't blend well with epoxy. With a clear base, you control everything from soft tints to fully opaque finishes.

A starter kit is built around learning. Smaller volume, more accessories, often a mold or two, and enough resin to finish several small craft projects before you've committed to a hobby. It's the easiest entry point, perfect for testing whether casting and pouring suit your style. Larger kits, especially gallon sizes, are about value and pace. The cost per ounce drops, and you keep momentum on bigger or back-to-back projects. The chemistry is identical across sizes; what changes is how often you reorder and how much sits on your shelf between sessions.

Sealed kits hold their quality for about one year when stored properly. After opening, plan to use the resin within six months for the cleanest results. Keep both bottles in a cool, dark spot, away from sunlight and big temperature swings. The hardener can develop a faint amber tint over time as oxygen reaches it, but that's cosmetic; once mixed with the resin, it disappears. Cap things tightly after every use. Before committing older supplies to a major piece, run a small test pour. That's why matching kit size to your real usage habits matters.

Absolutely. Plenty of small businesses and full-time crafters use Clear Resin for items they sell at markets, online, and through galleries. Jewelry, home décor, custom furniture, functional pieces; it's all fair game. Once fully cured for 72 hours, the resin is FDA-compliant for incidental food contact, which makes it suitable for coasters, charcuterie boards, and serving trays. For commercial volume, gallon kits make more financial sense, and many sellers stock up during sales to keep inventory steady. Just give every piece the full cure window before packaging or shipping.

The kits arrive ready to pour. Resin and hardener come pre-portioned in the correct ratio, so you simply measure equal parts, mix thoroughly for the time stated on the label, and pour. No solvents, no extra chemicals. Temperature matters more than people expect, though. Both components should sit between 75 and 85°F (24 to 30°C) before mixing. If your kit was shipped during cold weather or has been stored in a garage, let it warm up at room temperature, or set the sealed bottles in a warm water bath. Cold resin traps bubbles and shortens working time.

Surface cure usually happens within 24 hours, meaning the piece is dry to the touch and dust resistant. Demolding from silicone molds is generally safe between 24 and 48 hours, depending on thickness and ambient temperature. Full mechanical cure, where the resin reaches its final hardness and chemical resistance, takes around 72 hours. For food contact pieces or anything that will see daily handling, wait the full 72 hours before use. Cooler rooms slow the cure; warmer rooms speed it up, though pouring above 85°F can shorten working time too aggressively.

Bubbles come from two main sources: the mixing process and the substrate. Mix slowly, scraping the sides and bottom of your cup, and let the mixed resin sit for a minute before pouring so trapped air can rise. A heat gun, butane torch, or even a hair dryer on low passes quickly over the surface releases most surface bubbles. For porous materials like raw wood, seal the surface first with a thin coat of resin and let it tack up before the main pour. Working at the right temperature, around 75 to 85°F, also reduces bubble formation noticeably.

For shallow casting and coating, our clear epoxy resin works well in layered pours of up to ¼ inch at a time. For genuinely deep pour applications, river tables, encapsulating objects, or single pours over 1 inch, look for a dedicated deep pour resin formulated to cure slowly without overheating. Pouring a standard clear resin too thick can cause it to heat up rapidly, yellow, or crack. Check the product page for each kit to confirm maximum pour depth, or reach out before ordering for larger furniture-scale builds.